The first series of stamps, comprising the values ½d, 1d, 2d, 3d, 4d, 6d, 8d and 5s, were adopted from the New South Wales design. The New South Wales printing plates were altered by hand with the letters 'N.S.W.' at the foot of the design being chiseled away, leaving a blank space.

There were three perforation machines used on these stamps. They measured 11 (holes per 2 cm), 11.5 and 11.8. The 11.5 gauge was used only until October, 1902. Stamps with the 11 gauge are scarcer than others. The 1d and 2d are found perf 11 x 11.5 (the 2d is scarcer) and the 1d is found perf 11 x 11 and is a very rare stamp, particularly in mint condition.
The 1d and 4d values with upright watermark are scarcer than those with inverted watermarks, the 2d value is scarcer with inverted watermark.
The ½d, 8d and 5s appeared in a scarce dull green shade.
The distribution of these stamps is a point of interest. Tasmania ordered far more stamps than it needed and all values can be easily found with Tasmanian cancels. The 8d is found only with Tasmanian cancels. The period of use extended into the 1920s.
All values except the 8d were sent to Queensland, South Australia and Western Australia. The 5s value is seen with 1925 cancels from Townsville (as is the 5s value from the second series). I suspect this was some form of late distribution, stamps cancelled with contemporary dates (1902 - 1909) are of interest.
The 3d value is often seen with New South Wales cancels, but there is no record of official distribution within New South Wales. Other values with New South Wales cancels are very scarce.