Hi Phade --
you wrote --
Quote:
and your positive 14L1i is it.
As I mentioned in my last post --
Quote:
This stamp is badly cut in and is barely a "2-margin" example -- which makes plating very challenging as much of the areas of recutting are gone.
That said -- I am fairly confident that your stamp is position 14L1i -- but hard to be 100% certain given the completely missing top frame line, the significant cut-in at left which removed roughly 60% of the LFL (and along with it a good chunk of the upper left corner), and lastly, the missing piece of the RFL at its lower end.
Again -- to be clear -- I am not 100% certain that 14L1i is it -- but it is the best match that I can find given what we have to work with in the patient stamp.
As far as questioning if the stamp is a #10 or a #10A -- unless there is a partial recut of the LIL that we cannot see because is was cut off -- I see no trace of recutting in either the left or right inner lines. That said -- what looks like a very partial RIL at its upper end -- and perhaps a trace of an LIL at its lower end -- both both came from the transfer roll when plate 1E was re-entered to become plate 1i. In other words -- these are not recuts.
If this were my stamp, I would mark it "probably 14L1i" and move on.
And, YES -- I still have your tentative 76L2E and 94-95R2E patients in the queue for confirmation -- and will get to them as time permits.
// ioagoa