| Author |
Replies: 17 / Views: 4,231 |
|
Valued Member
United States
258 Posts |
|
|
I acquired specimens of these two in a 200+ stamp lot on ebay and I'd like opinions on whether the right hand perfs have been cut away or they from the right side of the sheets. I haven't been able to find any documentation on the sheet layouts to determine whether the stamps on the right edge were perfed on the right hand side.  Thanks, Terry
|
|
Send note to Staff
|
|
|
|
|
Rest in Peace
7742 Posts |
|
|
Hi tlmcca...Found a few of them on ebay...might be the stamps on the ends of the plate..See samples below.. Robert   |
Send note to Staff
|
|
|
Pillar Of The Community

United States
663 Posts |
|
|
Pillar Of The Community
3860 Posts |
|
|
Some of these older stamps have straight edges since they were cut in the middle of the large sheet into smaller panes. See example of pane of 50 stamps with straight edges on left side and bottom: http://mtmstores.com/live/48-31000.jpg |
Send note to Staff
|
| Edited by jogil - 06/12/2015 10:51 pm |
|
|
Valued Member
United States
258 Posts |
|
|
Quote:Some of these older stamps have straight edges since they were cut in the middle of the large sheet into smaller panes. See example of pane of 50 stamps with straight edges on left side and bottom: http://mtmstores.com/live/48-31000.jpg Thanks, jogil. Based on the image of the sheet of #147 there should only be straight edges on the bottom or left hand side so it looks like mine is either damaged or mis-perfed, probably the former  . I'll plan to keep them mounted until I find a better specimen. Terry |
Send note to Staff
|
| Edited by tlmcca - 06/12/2015 11:49 pm |
|
|
Valued Member
United States
258 Posts |
|
|
Thanks, oldguy. Unfortunately my local library doesn't give access to Canadian Philatelist, or any other stamp mags. I just joined RPSC so maybe I'll be able to view back issues. Terry |
Send note to Staff
|
| Edited by tlmcca - 06/12/2015 11:39 pm |
|
|
Pillar Of The Community
United States
770 Posts |
|
|
Hi Terry. These may have been printed in sheets of 200, then cut into panes of 50? If so, what you saw in that image was the upper right pane of 50, and you stamps could have genuine straight edges, from either of the left panes. |
Send note to Staff
|
|
|
Pillar Of The Community
Canada
728 Posts |
|
|
Yes, I agree. This issue was printed in sheets of 200 which were then cut into 4 panes of 50. All stamps on the inner columns/rows have straightedges. So your stamps come from one of these columns. |
Send note to Staff
|
| Edited by jimjung - 06/13/2015 08:00 am |
|
|
Valued Member
United States
258 Posts |
|
|
Thanks to everyone for your insight. I think I'll keep on the lookout for better specimens but they won't be number 1 & 2 on my list.
TErry |
Send note to Staff
|
|
|
Pillar Of The Community
Canada
728 Posts |
|
|
Since they are natural straightedges, there's nothing wrong with those stamps. Matter of fact, they are both nicely centered with large margins so I would rate them as Very Fine Used. |
Send note to Staff
|
|
|
Valued Member
Canada
106 Posts |
|
|
These are actually less common than copies perforated on all four sides, but for some reason, many collectors think of them as inferior or faulty. |
Send note to Staff
|
|
|
Valued Member
Canada
382 Posts |
|
|
In 2010, 2011 and 2012 there was a 7 part article in The Canadian Philatelist written by Ernie Wlock. Anyone who is a member of the Royal Philatelic Society of Canada can go online and read these back issues. Anyone who is not a member should give some consideration to joining the RPSC. A membership application is online at www.rpsc.org. A membership is not expensive but it does carry some worthwhile benefits. GJP |
Send note to Staff
|
|
|
Valued Member
United States
258 Posts |
|
|
 I joined this week and I'm waiting for whatever they send in the way of initial logon credentials. Terry |
Send note to Staff
|
|
|
Valued Member
Canada
382 Posts |
|
|
Welcome to the RPSC Terry. I became a member in 1977 and a life member in about 1980 and have never regretted joining. I never figured that I would be managing part of the RPSC National Office but that too is a great retirement gig.
GJP |
Send note to Staff
|
|
|
Pillar Of The Community
3860 Posts |
|
|
Valued Member
Canada
382 Posts |
|
|
Jogil, congratulations and welcome to the ROYAL. I am sure you will enjoy the value of your membership. I suggest that you go online to the RPSC website and check out the info on next year's convention to be held in Kitchener Waterloo. The ROYAL is a good show to attend especially if you wish to see some of the top exhibits in Canada. This is the time to start thinking about attending or participating.
GJP |
Send note to Staff
|
|
Replies: 17 / Views: 4,231 |
|