Stamp Community Family of Web Sites
Thousands of stamps, consistently graded, competitively priced and hundreds of in-depth blog posts to read








Stamp Community Forum
 
Username:
Password:
Save Password
Forgot your Password?

This page may contain links that result in small commissions to keep this free site up and running.

Welcome Guest! Registering and/or logging in will remove the anchor (bottom) ads. It's Free!

Unitrade 197c – Die II – Babn Rotary Press -Accurate Perforation

 
To participate in the forum you must log in or register.
Author Previous TopicReplies: 3 / Views: 638Next Topic  
Rest in Peace
7742 Posts
Posted 08/17/2020   1:43 pm  Show Profile Bookmark this topic Add wert to your friends list Get a Link to this Message
I was working with a few Scott 197 and noticed the DIE II {Unitrade 197c} was assigned a perforation of 11 x 11....Did some perf. measurements and noticed 11.25 x 11....Contacted jogil {perforation guru} and he verified that these 11.25 x 11 rotary stamps were the new perf.


See write up as per jogil in BNAPS {Whole Number 539, Volume 71, Number 2}...Below is my quick measurement I did...Just so you can get an idea what we are talking about...
Robert

Send note to Staff
Edited by wert - 08/17/2020 6:25 pm

Pillar Of The Community
3860 Posts
Posted 08/17/2020   2:32 pm  Show Profile Bookmark this reply Add jogil to your friends list  Get a Link to this Reply
The BNAPS perforation expert is Richard A. Johnson. See http://www.bnaps.org/books/bookdeta...hp?bookid=58
Send note to Staff  Go to Top of Page
Edited by jogil - 08/17/2020 2:45 pm
Pillar Of The Community
3860 Posts
Posted 08/31/2020   10:41 am  Show Profile Bookmark this reply Add jogil to your friends list  Get a Link to this Reply
I have tried many times to get this point across on SCF and in philatelic journals, especially the printing and perforating differences.

These rotary press stamps were printed on long paper webs/rolls. This required one perforator that could perforate the rolls in two directions (vertically and horizontally) before the rolls were cut into separate sheets. The short horizontal perforations were perforated by perforating bars gauging around 11.25 perfs. per 2 cm. The long vertical perforations were perforated by perforating wheels gauging around 11 perfs. per 2 cm.

On the other hand, the flat plate stamps were printed on individual separate sheets of paper. This required two separate perforators that could perforate the sheet in two different directions. One perforator perforated the sheet horizontally with perforating wheels gauging around 11 perfs. per 2 cm. Another perforator perforated the sheet vertically with perforating wheels gauging around 11 perfs. per 2 cm.
Send note to Staff  Go to Top of Page
Edited by jogil - 08/31/2020 10:50 am
Rest in Peace
7742 Posts
Posted 08/31/2020   11:16 am  Show Profile Bookmark this reply Add wert to your friends list  Get a Link to this Reply
Jogil
I know who you are in the stamp world...I realize you are the perf guru and more SCF collectors and philatelic journals should take notice what is really out there...I to am troubled with perforation accuracy as you know.

I have been working with Newfoundland BNAPS editors doing a project with reguards to perforation accuracy and have a excel sheet with approx. 165 stamp perforation differences.

I can't believe collectors and organization have not paid attention to perforations...They pay attention to colour, re-entries, size, etc.

Robert
jogil, I am behind what you do and are trying to bring to the stamp world...Koodos buddy.
Send note to Staff  Go to Top of Page
  Previous TopicReplies: 3 / Views: 638Next Topic  
 
To participate in the forum you must log in or register.

Go to Top of Page

Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Stamp Community assumes no liability for errors. Copyright 2005 - 2026 Stamp Community Family - All rights reserved worldwide. Use of any images or content on this website without prior written permission of Stamp Community or the original lender is strictly prohibited.
Privacy Policy / Terms of Use    Advertise Here
Stamp Community Forum © 2007 - 2026 Stamp Community Forums
It took 0.12 seconds to lick this stamp. Powered By: Snitz Forums 2000 Version 3.4.05