How Did You Mount The Battle Of White Plains Sheet?

The Battle of White Plains souvenir sheet (Scott #630 US) can be bought in different cut sizes. All my other souvenir sheets have mounts made especially for them. But getting one for Scott #630, and preventing it from sliding around in the mount would be difficult because there is no exact size. How did you mount it? Did you buy the closest size mount off the shelf? Modify one off the shelf? Even make your own?

I finally got a deal on a good one and want it to look nice in the album.


Thanks
-IBFS

If it is the same size as The World of Dinosaurs Scott #3136. There are no mounts made that size. Go to Walmart's and up by the Cash Registers are packages of Avery Advantage Sheet Protectors. They are Acid Free, PVC free, Archival Safe. They come in packages of 50 for about $5.00 a package. Trust me they are safe. Or you can pay Mystic Stamp Company $14.50 for a package of ten of the exact same thing. I have stamps I put in them three or four years ago and they are doing just fine. The pages are clear though. No black backing.

For this sort of thing, I buy mounts that are the right height,
but wider than what I need, then cut to width.
I started cutting with scissors, but found a mount cutter that
makes great straight edges. Making your own mounts out of bulk
stock is fun and makes hard to fit stamps, like those with
selvege, easy to deal with.

ratio411 they don't make mounts this size. The largest mounts you can buy are 161x161mm

IBFS,

What are the dimensions of your sheet, in millimeters?

This info, and the sheet, will be here in 4 or 5 days. I'll let you know.

-IBFS

According to Ihobb.com, it is 204 x 153, which is also the size for the Bicentennial souvenir sheets.
http://www.ihobb.com/p/PRINZMISC/962.html

Showgard also has a number of souvenir sheet sizes with the largest being for full sheets at 265 x 231.

http://www.showgard.com/results.cfm?id=2

I have my #630 in a Showguard mount, trimmed as needed.

Yeah, just cut that 630 sheet into pieces until it fits the mounts you have

Thanks Guys Mystic Stamp Company lists their largest mount at 161x161 which is no where's large enough. So what size would the World of Dinosaurs Scott #3136 take. Does Showguard have a scaled sheet to measure the pages by?

Just echoing what ratio said. This is easy and really the best way to get custom-fitted mounts.

Only as a last resort


-IBFS

Dimensions 160mm W x 136mm H. I was about to take Kirk's advice and cut the sheet into pieces for easier mounting but then I found this...

http://www.ebay.com/itm/Showgard-Bl...310331236983

Thanks all
-IBFS

In case anyone is curious, I received this with my new Mystic Heirloom: