| Author |
Replies: 16 / Views: 3,255 |
|
New Member
3 Posts |
|
|
|
What is the best way to ship stamps so that they are protected?
Thanks, Kyle
|
|
Send note to Staff
|
|
|
|
|
Pillar Of The Community
USA
1881 Posts |
|
|
Hi Kyle.......
For singles and small groups I use a glassine or 102 type card with a cut to fit envelope stiffener, cut from things like dry cereal boxes, manila file folders or just about anything similar. |
Send note to Staff
|
|
|
Pillar Of The Community
USA
3315 Posts |
|
|
I do likewise, and I've been known to put the card or envelope inside a sealed ziplock bag - especially if shipping overseas. I learned that the hard way - several times. |
Send note to Staff
|
|
|
Pillar Of The Community
USA
3315 Posts |
|
|
Pillar Of The Community
Canada
1755 Posts |
|
|
Another good stiffener is old greeting card fronts.
You can cut them down to the size you need for smaller envelopes. Otherwise, for bigger envelopes, I use cereal boxes and the like, cut down.
David
|
Send note to Staff
|
|
|
Pillar Of The Community
Finland
753 Posts |
|
|
Adding some stiff card around the stamps is a MUST HAVE, especially if shipping worldwide sendings.
If sending mint/unused stamps, I normally place them inside an sealed plastic bag. This way they don't turn into "brick" if left to recipients mailbox if the weather is moist.
-keijo- |
Send note to Staff
|
|
|
|
Rest in Peace
United States
1806 Posts |
|
|
Pillar Of The Community
Israel
6191 Posts |
|
|
For larger packets I use something stronger than Cereal boxes which can easily be bent. [and often are]. I use lightweight Corex card. Some dealers use the same card for their sendings and I have saved this to use for mine. I have also found a batch here which I will never use up  |
Send note to Staff
|
|
|
Valued Member
USA
78 Posts |
|
|
you can still get wax paper envelopes at post offices... or use small glassines and put in plastic ziplock to keep dry in transit(keep stamps separated to avoid sticking together)and use cardboard backing to protect during delivery. |
Send note to Staff
|
|
|
New Member
3 Posts |
|
|
Thanks for all of the responses guys!... Where is the best place to get glassines? |
Send note to Staff
|
|
|
Valued Member
United States
115 Posts |
|
|
I'm curious, is it important to have something covering the stamps on both sides for scrape protection (assuming stamps are in a glassine)? For example, sandwiched between cardboard and cereal box.
Clark |
Send note to Staff
|
|
|
Pillar Of The Community
USA
867 Posts |
|
|
I always put one stiffner in envelopes to keep it from being bent. For larger manilla envelopes I place a stiffner in front and back of the merchandise being shipped.
Butch |
Send note to Staff
|
|
|
Pillar Of The Community
USA
867 Posts |
|
|
Pillar Of The Community
Finland
753 Posts |
|
|
Personally I recommend placing the glassine(s) inside "sandwich" as it simply safer/better practise. Aside from bending it provides additional protection from moisture, "idiots" writing on top of covers etc. |
Send note to Staff
|
|
|
Valued Member
USA
304 Posts |
|
|
For the past several years, I have used a system of placing about 6-8 small glassines into a larger one and then cutting out to size a section of an old manila folder and taping the larger glassine inside it. This way the stamps have double glassine and front and back folder protection. No complaints about damaged stamps in over 500 mailings. 1 or 2 that had envelope damage suffered no contents damaged. MINYC |
Send note to Staff
|
|
|
Pillar Of The Community
Canada
1259 Posts |
|
|
Stamps galore to the forum I agree with all the suggestions above. I might add, ensure the content are centered on the backing, sometimes the corners of the envelopes get bent in shipping. David (DJD) |
Send note to Staff
|
|
Replies: 16 / Views: 3,255 |
|